Carroll Painting · Colorado Springs, CO

How to Read Exterior Paint Failure

Start by describing what the coating is doing. A loose flake, a raised bubble and a crack across two materials are clues you can record from the ground.

Request a Free Estimate

Family-owned in Colorado Springs since 1988

How can I describe exterior paint failure so a painter can assess it?

Record the shape, location and spread of the damage. Note whether you see lifting flakes, raised blisters, or a crack that appears to continue through the material. Add when it appeared and what is nearby so an assessment can consider possible causes.

Flakes and edges lifting

Look at where the edges lift and whether a previously applied coat or the underlying surface is visible. Record the area without disturbing the coating.

Raised bubbles

Note whether they appear in sun, after rain or around a repeated wetting point. Heat, moisture and prep can all contribute to blistering.

Lines and branching cracks

Look for whether the lines follow a joint, repeat at openings or continue into the material. A photograph alone cannot establish the depth or cause.

Create a three-photo record

Use a ground-level overview, a detail of the problem, and a comparison area where the coating is sound.

  • Show the whole side.. Capture the pattern in relation to the trim, openings and roofline.
  • Take a close view.. Include texture, color changes and a visual reference for the size without scraping or probing the damaged area.
  • Show a comparison.. Record a better-performing wall and any timing, previous repairs or weather events that might help explain the difference.

The Carroll family

Learning to notice the edge of a failure

In our family, learning preparation means hearing why a more experienced hand looks closely at an edge or transition. Those observations help Carroll define what needs attention before the next finish is proposed.

Read the Carroll family story

Questions homeowners ask

Is every blister caused by moisture?

No. Heat, moisture and insufficient preparation are all possible. Where blisters appear and when they formed can guide assessment.

Can I tell a paint crack from a material crack?

The visible line can help record the location. A professional can review whether it extends beyond the finish and what the wall needs.

Should I scrape a spot to see what is underneath?

Leave suspect coatings intact and discuss safe assessment, particularly if the home predates 1978.

Further reading: Sherwin-Williams visual coating failure guide · EPA guidance for work that may disturb old painted surfaces

Bring your photo record to the estimate

Tell us where the failure starts and what changed. We can use your observations to guide a painting walkthrough.

Request a Free Estimate