Carroll Painting · Colorado Springs, CO
Why Some Colorado Exterior Finishes Wear Faster
The sunny side can fade while the shaded side stays damp. Different conditions around the same home can cause different kinds of finish wear.
Request a Free EstimateFamily-owned in Colorado Springs since 1988
Why do some exterior finishes wear faster in Colorado Springs?
Exposure can vary from wall to wall. Sunlight can weather wood and coatings, repeatedly wet areas can lose adhesion, and joints can expose edges to water. Existing preparation and the type of material also matter, so compare the affected elevation with a more sheltered one before deciding what to repaint.
Sun on an exposed wall
Look for changing color, eroded coating and bare edges. Compare them with the same materials in shade.
Repeat wetting
Note irrigation, snow piles and drips from above. Areas that stay wet need their own assessment before painting.
Connections and prior preparation
Look at corners, trim, cracks and older patches. What happens where materials meet can help explain why a finish wears unevenly.
Compare two sides of the same home
Bring a photo of the affected elevation and a photo of one that has held up better.
- Record what has changed.. Note fading, lifting, stains and the season or weather when you first observed them.
- Check the material beneath.. Distinguish worn finish from damaged wood, stucco or other areas needing separate attention.
- Plan by exposure.. Ask how the finish, prep and timing suit each relevant surface, including what you need to monitor later.
The Carroll family
Judge the surface by what it faces
Work in Georgia shipyards taught earlier generations to pay attention to the conditions the material would face. In Colorado Springs we apply that habit to each elevation, especially where sun and wetting change from one area to the next.
Read the Carroll family storyQuestions homeowners ask
Will every exterior need repainting on the same schedule?
Service life depends on exposure, materials, prior work and maintenance. Review the surface condition to set your priorities.
How can I tell whether the paint or siding is failing?
Show any loose, soft or warped material separately from peeling or fading paint so it can be assessed.
Is sunlight always the reason for fading or wear?
Sun can contribute. Compare finish age, moisture and preparation as well as exposure.
Further reading: USDA Forest Products Laboratory guidance on finishing wood
Show us the side that is wearing first
Share an affected wall and a more sheltered comparison. Carroll can discuss exterior preparation, painting and any material questions to review.
Request a Free Estimate