Carroll Painting · Colorado Springs

Paint Finish Schedule and Sample Approval Checklist

A finish schedule tells everyone which color, product and sheen belong on each surface. Approving real samples and keeping the decisions in one place helps the crew follow your choices from room to room and surface to surface.

Request a Free Estimate

Put the area, surface, exact color name and code, product line, sheen and sample decision on each line of the schedule. Share one dated version with the people who approve and apply the finish.

Give each distinct surface its own line

Start with the areas in the painting proposal. Inside, separate walls, ceilings, trim, doors and cabinets where the color, product or sheen differs. Outside, list siding or stucco, trim, fascia, doors and accents. Mark boundaries in open rooms and identify surfaces that will keep their current finish.

Use a format you can repeat for every line. Record the room or elevation, the surface, the manufacturer's exact color name and code, the proposed coating and sheen, where the sample is located, and who approved it and when. Note any item still pending. Where the proposal specifies primer or preparation, keep that information linked to the surface so it remains visible.

Look at the samples in the house's actual light

Compare physical samples next to flooring, countertops, masonry and other fixed finishes. Check them in daylight and under the lights you use at night. Outdoors, compare a sunny and a shaded face. Texture and sheen affect how light reflects, so confirm what the sample represents before final approval.

A digital preview or small chip is useful for narrowing options. When color or sheen is important, ask whether you can review a sample in the proposed product and finish, and agree on where to test it. A color sample made in another product or sheen may look different from the final application.

Approve the exact combination before ordering

Check the sample against the line in the schedule. Confirm the color applies to the correct surface and the sheen matches what was selected. Two surfaces can share a color name and use different products or sheens. A project may also use separate colors for the body, trim and accents, like Carroll's documented Herbal Wash exterior with Alabaster trim and a Grassland garage door.

Make sure the homeowner, designer and painter know who has final approval and how late changes will be handled. Confirm any applicable HOA approval for exterior colors. If a choice changes, revise the affected line and check with the estimator about material orders or schedule impacts.

Keep the version the crew actually used

Check the final schedule during the walkthrough and keep it with your estimate and the project photos. If a finish changed during the job, record the product and sheen that were applied. This gives you a better starting point when repainting or discussing a future touch-up.

Common questions

Is a color name enough to approve the finish?

Record the manufacturer and color code as well as the name. Confirm the paint product and sheen for the specific surface. That gives the crew a complete entry to check against the sample.

Can I approve a color from a screen or photo?

Screens and photos help narrow down options. Check a physical sample where the paint will be used, under the lighting you normally see, before confirming the final selection.

What if the walls and trim use the same white?

List them separately if the coating or sheen differs. Keep the surface names and finish details clear even when the color name and code match.

Related services and project examples