Real Stories · Carroll Painting

Pressboard Siding and Roofline Prep in the Same Exterior Estimate

In this exterior estimate, we named the pressboard siding and listed the soffits, fascia and other roofline surfaces. We also wrote down the prep at the places where those surfaces meet. The customer accepted the proposal, which gives us an example of how to read the scope before work begins.

Request a Free Estimate

Look for three things on your estimate. The siding material, the nearby surfaces that receive paint, and the prep where those surfaces meet. Ask us to walk through those details with you before you choose a scope.

Start with the material on the wall

We listed pressboard siding by name. The proposal called for washing the exterior, scraping peeling paint, sanding rough areas and raised edges, and priming raw or exposed surfaces. It also called out areas affected by the sun in the primer scope. Those lines told the customer what we planned to do before applying the finish coats.

During an estimate, show us the edges and sections that look different from the rest of the wall. If you have a portion where paint is peeling or a board that looks swollen, point it out while we walk the exterior. We can discuss which areas need a closer look and write down the prep that belongs in your scope.

Follow the line from siding to soffit and fascia

We included several transitions in the prep description. The list covered visible cracks and seams where siding meets trim, where siding meets soffit, and where soffit meets fascia. The soffit is the underside of the roof overhang. The fascia is the board along its outer edge. Both are easier to identify when you stand back and follow the roofline around the house.

Ask us to show you which joints and transitions the estimate addresses. The condition and function of a joint matter when we assess what it needs. This scope described the places we expected to review and prepare at this house. Your estimate should do the same for yours.

Check the list of surfaces that receive paint

The finish specification called for two coats on the listed exterior surfaces. Along with the siding, the written scope named soffits, fascia, exterior ceilings, painted doors, gutters and downspouts. It also described masking features outside the painting scope, including windows and fixtures. That tells you where the proposal called for paint and how nearby features were to be protected.

When you compare estimates, read the wall and roofline entries together. Ask us to confirm anything you expect to be included, particularly a porch ceiling, a painted door or gutters that are easy to miss from the ground. We can put the answer next to the relevant line so you can find it when you review the estimate.

Walk the exterior with the estimate in hand

Start with a wall you can see clearly, then trace the adjoining trim and roofline. A few wide photos can help us identify the surfaces. Bring a closer photo if there is peeling paint or a rough edge you want to discuss. This example describes the scope that was accepted. It shows how a written estimate can record the details you see on that walk.

Common questions

Did the scope cover soffits and fascia?

Yes. The accepted estimate named both in the painting scope and described preparation at the transitions around them.

What did the primer entry cover?

It specified raw or exposed surfaces, including prepared spots and areas significantly affected by the sun.

What should I show you at a siding estimate?

Point to the material, any rough or peeling spots and the nearby surfaces you want painted. Wider photos help us see how the walls and roofline connect.

Related services and project examples